Category Archives: 44-Webbing

44 Pattern Haversack

We have previously taken an overview of the 1944 pattern haversack and its contents here. Tonight we are going to look at the haversack in more detail. One of the main aims of the new 44 pattern webbing set was to address the concerns soldiers had about its predecessor, the 37 pattern set. One major problem faced by troops was that the 37 pattern haversack was not large enough, indeed during the second world war one field expedient was to take the 37 pattern large pack and sew two ammunition pouches to the sides to increase the carrying capacity. The 44 pattern haversack was therefore deliberately larger, with more straps and securing points to allow a greater flexibility in what a soldier could carry. Whilst it was soon found to still be too small, it was a major improvement on anything that had gone before. The haversack, like the rest of the 44 pattern set, was made of a lighter weight green cotton webbing with anodised metal fittings to prevent rust; it had a stores code of A.A. 2007. The following description of the haversack comes from the accompanying War Office Pamphlet on the webbing set:

Haversack- The dimensions of the haversack are approximately 8 inches by six inches by 10 inches deep:imageand it has a flap secured by two small straps and quick-release buckle:imageSide weather flaps are provided, and in each of these an eyelet is fitted to enable the flaps to be secured, if necessary, by a piece of string or cord:imageOn each side is fitted a pocket approximately 6 inches by 2 inches by 8 ½ inches deep:imagewith a flap secured by a quick-release fastener:imageone pocket will accommodate the mess tin and the other rations or small kit. A 3-bar buckle is fitted to each side of the haversack, for attachment to the ends of the braces should it be necessary to carry it on the side:imageOn the back, two 2-inch tabs are provided for attachment to the shoulder straps:imagetwo loops are provided to tuck away the spare ends of the shoulder straps:imageOn the base are two 3-bar buckles for securing the ¾ inch diagonal straps forming part of the shoulder strap:imageFor carrying the bedding two long ¾ inch straps with quick-release buckles are fitted to the base:imageSleeves are provided to enable these straps to be stowed away when not in use.

There are the following attachments: a chape with two grommets:imageand a horizontal strap (A portion of which is reinforced) with a quick-release buckle:imageThese are both attached to the flap. A small buckle chape and tab are fixed to the bottom edge:imageThese can be used for the carriage of tools. When carrying the shovel the strap with the quick release buckle should be wound twice round the shaft, and when carrying a pick the strap (reinforced portion) will be passed first round the head of the pick then round the shaft. At each bottom back corner of the haversack a strap is sewn, one having a 3-bar buckle and the other a tip:imagethese pass through one or both of the web loops on the back of the basic pouches and connect round the body in front. This is particularly useful when crawling to prevent sag of heavily laden pouches, or to retain the haversack in position when quick action is anticipated.

NOTE- the back and base of the haversack is lined with waterproof cloth to prevent penetration of moisture from the body:image