We are nearing the end of our review of the Canadian 64 pattern webbing set, but there are still a couple of nice pieces to go and tonight we are looking at the respirator case:Canada had adopted an updated respirator in the 1950s known as the C2, and this was further improved in the early 1960s to become the C3. These respirators were stored in a specialist pouch that was slung on the left hip as part of the actual webbing set, with cotton webbing versions issued with the 51 pattern, and an updated plasticised cotton version being introduced as part of the 64 pattern set. The respirator case is a large bag, with a side opening to allow the mask to be placed inside. The opening is sealed by rolling it up and attaching a piece of Velcro as a fastener:The webbing tab allows the user to easily open it, even when wearing NBC gloves. A large pocket is provided on the front of the haversack for gloves, spare canisters, decontamination equipment etc:This is secured with two metal press studs. A second pocket is fitted to the opposite edge to the haversack’s main opening:This is far smaller and has internal dividers to allow it to carry anti-nerve agent epipens, again a cotton tab is provided for easy access when wearing gloves. As with the rest of the items of the 64 pattern webbing set, the method of attachment to fasten the haversack to the belt is woefully inadequate, here consisting of two Velcroed loops:Markings consist of a single stamping on the bag that indicate the haversack dates from November 1982 and was made by ‘Manta’:The use of plasticised cotton was actually far more appropriate for this component than the earlier cotton version, being much easier to decontaminate on a potential Cold War nuclear battlefield.